Over the previous two years, as high-end CPUs have develop into extra thermally demanding, coolinpng producers have launched upgraded liquid coolers to extra successfully dissipate the warmth warmth. This summer season particularly has seen the discharge of many spectacular liquid coolers from Cooler Grasp, DeepCool, and different rivals.
As we speak we’re taking a look at Lian Li’s newest 240mm AIO, the Galahad II Trinity Efficiency. Does Lian Li’s new 240mm AIO stand out from the group and earn a spot on our Greatest AIO Coolers checklist? Its bigger 360mm sibling is already there. Will Lian Li take the highest spots in each measurement classes? We’ll need to put it by way of testing to say for certain. However first, listed below are the cooler’s specs, direct from Lian Li.
|Cooler||Lian Li Galahad II Trinity Efficiency|
|Put in Dimension||277.5mm (L) x 119.2 mm (W) x 52mm (D)|
|Radiator Materials||Aluminum Single Wave Fins|
|Pump Seed||3200 RPM|
|Socket Compatibility||Intel Socket LGA 115x/1200/1700 AMD AM5 / AM4|
|Max TDP (Our Testing)||~250W on Intel i7-13700K|
Packing and Included Contents
Picture 1 of 2
The GA II Trinity 240 arrives in a package deal just like different coolers of it’s class. The internal contents are surrounded by molded cardboard and plastic coverings for the safety of the contents throughout delivery.
Included with the package deal are the next:
- Two 120mm followers, pre-installed
- 240mm radiator
- Thermal paste and utility instruments
- PWM splitter
- Mounts for all trendy CPU sockets (together with AM5 & LGA1700)
LGA 1700 Cooler Set up
Set up of Lian Li’s 240mm AIO is easy on Intel LGA 1700 methods.
1. I might advise securing the radiator previous to different set up steps. It makes the remainder of set up simpler, no less than in mid-tower and bigger instances.
2. Intel customers start by urgent the backplate in opposition to the motherboard and safe it by screwing within the mounting standoffs from the entrance facet of the motherboard.
3. Apply thermal paste to the CPU, after which place the CPU block in opposition to the motherboard and safe it with the included screws.
4. Apply thermal paste to the CPU after which place the CPU block in opposition to the mounting bars, safe it with the included thumbscrews.
5. Join the PWM and ARGB headers to the motherboard.
Options of Lian Li’s Galahad II Trinity 240
⋇ Massive Copper contact plate
The GA II Trinity 240 options a big copper CPU contact plate with vital revisions in comparison with previous-generation coolers from Lian Li. The skived fins have an elevated spacing to stop build-up of inner particles, and the peak and thickness of the fins have been improved. Moreover, a trench down the center of the skived fins has been applied for higher warmth dissipation of the coolant over the copper plate.
The seal for the copper chilly plate has additionally been improved, with straighter pathways for lowered turbulence and elevated airflow.
⋇ Full RAM compatibility
Because the CPU block doesn’t impede or overhang the DIMM slots on a motherboard, all sizes of RAM – irrespective of how tall – are appropriate with this cooler.
⋇ A number of CPU block choices
The CPU block has three selections for personalisation out of the field. The default fashion is an ARGB Infinity Mirror.
You’ll be able to change the big infinity mirror with the opaque subtle lighting ring. When this attachment is used, the middle could be changed with both a small infinity mirror or one other subtle lighting attachment.
⋇ Sleeved tubing with elevated width
The internal diameter of the water tubes has been elevated from 5.8mm to 7mm, rising the entire quantity of liquid by roughly 20%, which permits for higher warmth absorption.
The rubber tubes of the unit are strengthened and guarded with effective sleeving which additionally seems to be good. Lian Li features a leather-based cable administration tie to maintain the tubes tidy.
⋇ 27mm thick radiator
The 240mm Galahad II Trinity has a typical 27mm thick radiator, for a complete thickness of 52mm whenever you embrace the followers.
⋇ Two 120mm FDB followers
There’s extra to a cooler than simply the heatsink or radiator. The bundled followers have a major affect on cooling and noise ranges, in addition to the cooler’s seems to be.
Just like the followers included on the beforehand reviewed EKWB CR360 and Lian Li’s Galahad II Trinity Efficiency, the followers right here function distinctive connections that simplify cable administration by changing PWM and ARGB connections right into a single header inside a micro-fit 8-pin connector that has the same kind issue as CPU energy connections. This leads to a safer reference to much less cable administration to fret about.
|Mannequin||Lian Li Galahad II Trinity Efficiency 240 AIO|
|Dimensions||120 x 120 x 25mm|
|Fan Velocity||300- 2450RPM|
|Air Movement||As much as 79.9 CFM|
|Air Stress||As much as 3.26 mmH2O|
|Bearing Kind||Fluid Dynamic Bearing|
⋇ Non-obligatory software program management
Producers of AIO cooling methods typically fall into certainly one of two extremes in terms of cooler management: Both they power you to make use of bloated software program to regulate the gadget, or they don’t embrace any software program and rely solely on motherboard PWM and ARGB controls.
With Lian Li’s Galahad II Trinity Efficiency, you’ve got a alternative. You should utilize the default motherboard controls when you favor, however the firm additionally presents an optionally available obtain of the L-Connect3 software program for a extra custom-made expertise.
This software program presents in-depth lighting and pump/fan pace customization choices, with the power to regulate different appropriate ARGB gadgets. Sarcastically, you may as well return management of those choices to the motherboard with “MB Sync” possibility inside the software program.
Picture 1 of 3
LGA1700 Socket Bending
Word there are lots of elements aside from the CPU cooler that may affect your cooling efficiency, together with the case you utilize and the followers put in in it. A system’s motherboard can even affect this, particularly if it suffers from bending, which leads to poor cooler contact with the CPU.
In an effort to forestall bending from impacting our cooling outcomes, we’ve put in Thermalright’s LGA 1700 contact body into our testing rig. In case your motherboard is affected by bending, your thermal outcomes shall be worse than these proven beneath. Not all motherboards are affected equally by this subject. I examined Raptor Lake CPUs in two motherboards. And whereas certainly one of them confirmed vital thermal enhancements after putting in Thermalright’s LGA1700 contact body, the opposite motherboard confirmed no distinction in temperatures in any way! Try our assessment of the contact body for extra info.
Trendy high-end CPUs, whether or not Intel or AMD, are troublesome to chill in intensive workloads. Previously, reaching 95C+ on a desktop CPU may need been a trigger for concern – however with right now’s processors, that is thought-about regular operation. Related habits has been current in laptops for years because of cooling limitations in tight areas.
All testing is carried out at a 23C ambient room temperature. A number of thermal exams are run on every CPU to check the cooler in a wide range of situations, and acoustic measurements are taken with every consequence. These exams embrace:
1. Noise normalized testing at low noise ranges
2. “Out-of-the-box”/default configuration thermal and acoustics testing
a.) No energy limits enforced
b.) As a result of CPUs hit Tjmax on this situation, one of the simplest ways to match cooling energy is by recording the entire CPU package deal energy consumption
3. Thermal and acoustics testing in power-limited eventualities
a.) Energy restricted to 175W to emulate a medium-intensity workload
b.) Energy restricted to 125W to emulate a low-intensity workload
The thermal outcomes included are for 10-minute testing runs. To make sure that was sufficiently lengthy to tax the cooler, we examined each Thermalright’s Murderer X 120 R SE and DeepCool’s LT720 with a 30-minute Cinebench take a look at with Intel’s i9-13900K for each 10 minutes and half-hour. The outcomes didn’t change a lot in any respect with the longer take a look at: The typical clock speeds maintained dropped by 29 MHz on DeepCool’s LT720 and 31 MHz on Thermalright’s Murderer X 120 R SE. That’s an extremely small 0.6% distinction in clock speeds maintained, a margin of error distinction that tells us that the 10-minute exams are certainly lengthy sufficient to correctly take a look at the coolers.
Testing Configuration – Intel LGA1700 Platform
|CPU||Intel Core i7-13700K|
|Comparability Coolers Examined||BeQuiet! Darkish Rock Professional 4
Cooler Grasp Grasp Air MA824 Stealth
Cooler Grasp Hyper 622 Halo
Cooler Grasp Grasp Liquid Core 360L
Cougar Forza 85 Important
DeepCool Murderer IV
EKWB Nucleus CR360 Lux
|Motherboard||MSI Z690 A Professional DDR4|
|GPU||Intel ARC A770 LE|
|Case||Be Quiet! Silent Base 802, system followers set to hurry 1 setting.|
|PSU||Cooler Grasp XG Plus 850 Platinum PSU|