The FlashForge Artemis is an easy-to-use 3D printer for first time makers, college students and anybody who needs a carefree printing expertise. It is an open body printer with a direct drive and Z axis construct plate that gives regular movement for smoother prints.
The Artemis is usually plug and play. It comes absolutely assembled, and is refreshingly simple to arrange. I had it unboxed and printing inside 20 minutes. It got here with a beneficiant starter pack that included two full spools of filament and an upgraded PEI construct plate you’ll be able to set up if you get uninterested in chipping prints off the manufacturing facility glass plate.
The Artemis additionally has built-in WiFi and an easy-to-understand bespoke slicer. Retailing at $499, it’s designed to compete with one of the best 3D printers for learners and it delivers some good prints, but it surely’s additionally expensive, has a small construct quantity and requires handbook mattress leveling.
Specs: FlashForge Artemis
|Construct Quantity||190 x 195 x 200 mm (7.5 x 7.7 x 7.9 inches)|
|Materials||PLA/TPU (as much as 260 levels)|
|Extruder Sort Bowden||Direct drive|
|Nozzle .4mm MK8||.4mm (excessive movement proprietary)|
|Construct Platform||PEI textured spring metal sheet and Coated glass, heated|
|Mattress Leveling||Assisted Handbook|
|Filament Runout Sensor||Sure|
|Connectivity||USB stick, WiFi|
|Interface||Coloration contact display|
|Machine Footprint||406 x 416 x 469 mm, (16 x 16.4 x 18.5 inches)|
|Machine Weight||10 KG (22 lbs)|
FlashForge Artemis: Included within the Field
The FlashForge Artemis comes with every little thing it’s worthwhile to get your printer arrange, in addition to a couple of additional elements. You get instruments to keep up the printer, 3 spare nozzles, glue stick, a print elimination software and a USB flash disk. You additionally get a PEI coated flex sheet with a sticky again magnet you’ll be able to set up and two full sized spools of filament.
The USB flash disk incorporates check fashions, a PDF handbook and FlashPrint slicing software program. A paper fast begin information has instructions to get the printer up and working.
Design of the FlashForge Artemis
The FlashForge Artemis is a dice model, open body 3D printer with a Z mounted construct plate that strikes up and down whilst you print. Most Cartesian printers, just like the Ender 3 S1 Professional, have the mattress mounted on the Y axis the place it’s subjected to speedy backwards and forwards motion. This model of machine is extra compact than the standard mattress slinger, and produces smoother prints attributable to its light upward transferring construct plate.
Our check unit had a vibrant orange plastic case, however you even have the selection of royal blue. The massive contact display could be very responsive with extensively spaced buttons and simple to learn menu choices. I’m not keen on the rear mounted spool holder, which makes altering spools considerably troublesome. Nonetheless, the simple to load direct drive makes up for this hardship.
The FlashForge web site says Artemis can attain speeds of 180 mm/s and although it comes with a excessive movement nozzle, the cooling fan isn’t as much as the duty. I used to be capable of get glorious efficiency from the machine at 80 mm/s (a little bit faster than the 50 to 60 mm/s we get from commonplace printers), however pushing it quicker is questionable at greatest.
The Artemis has an odd dimension of excessive movement nozzle that you just’ll must buy immediately from FlashForge. The printer comes with three spares, so it ought to take some time earlier than you’ll have to order extra. Sadly on the time of this overview, nozzles for the Artemis are usually not listed on the FlashForge web site.
Curiously, the Artemis comes with two construct surfaces – a manufacturing facility put in glass plate and a separate PEI flex plate with a magnet so as to add your self. A somewhat deceptive illustration on the FlashForge web site makes it appear like the construct plates will stack, however that was not the case. The glass is held in place with brackets within the again and latches on the entrance that snugly maintain the plate. There is no such thing as a room for the additional thickness of the magnet. When you select to put in the flex plate there’s no going again – not with out chiseling the magnet’s adhesive backing off. Personally, I’m comfortable with this, because the flex plate is superior in my view.
Information may be moved through a USB thumb drive or in-built WiFi. The WiFi was very simple to arrange, however can solely be accessed via FlashPrint.
Assembling the FlashForge Artemis
The FlashForge Artemis comes absolutely assembled and solely must be unpacked. Merely clip the numerous zip ties holding the software head in place and pop within the spool holder.
Leveling the FlashForge Artemis
The FlashForge Artemis has assisted handbook 3 level leveling, a step down from the absolutely automated mattress leveling on less-expensive opponents such because the Elegoo Neptune 3 Professional. It strikes the print head to 3 leveling factors – one within the again and two within the entrance. The menu display walks you although your complete course of with very clear directions.
You’ll want a chunk of extraordinary paper positioned on the glass mattress. Click on Management → Stage to begin this system. It can begin with a single rear level, the place you progress the nozzle up or down with instructions from the display. Decrease the nozzle till a tiny little bit of friction is between it and the paper if you slide it. This units the z peak. The following two factors are positioned within the entrance corners. Right here you’ll alter the mattress up or down utilizing the knobs till sliding the paper simply meets resistance.
Loading Filament on the FlashForge Artemis
The spool holder is mounted on the rear of the printer, making loading filament considerably awkward. Fortunately, getting extraordinary filament into the hotend could be very simple on the Artemis. The machine has a reverse Bowden, that means a tube is used to information filament from the spool holder, excessive of the machine to the direct drive.
The Bowden tube suits snugly into the software head and there aren’t any levers. Filament is pushed via the tube from the spool and stops when it meets resistance. Press “load filament” on the contact display. It can heat the hotend to 200 levels and mechanically feed the filament.
Getting ready Information / Software program for FlashForge Artemis
The Flashforge Artemis got here with its personal FlashPrint slicer, which is tuned particularly for the Artemis. It’s a full characteristic slicer on par with Cura, with a fundamental mode for fast slicing and an skilled mode for individuals who need granular management. It additionally has the flexibility to connect with the machine through WiFi to save lots of you the effort of coping with the USB stick.
If you wish to use Cura or PrusaSlicer you have to to create your personal profiles from scratch. For this overview, I caught with FlashPrint so I may make the most of the WiFi file switch.
Printing on the FlashForge Artemis
The FlashForge Artemis comes with two full rolls of FlashForge PLA, one white and one black. If you’d like extra thrilling supplies like silks and multicolor filaments, it’s best to take a look at our information to the greatest filaments for 3D printing for recommendations.
The Artemis additionally comes with two construct plate choices, which is uncommon. A coated glass plate is manufacturing facility put in, whereas a PEI flex plate and magnet is included. Sadly, as soon as you turn to the flex plate you’ll be able to’t return – the clips are held in place with troublesome to entry screws and don’t have sufficient clearance to carry each the glass and magnet. For that purpose, I ran a number of prints on the glass mattress earlier than switching to the PEI plate.
The primary print I ran was McGybeer’s Cali-Dragon within the offered black PLA. I used the already put in glass construct plate and it got here unfastened producing a foolish whipped topping impact on the pinnacle. For the 2nd attempt I added glue – as really useful within the handbook – and it held firmly and printed fantastically with easy sides and clear antlers. It additionally required a chisel to take away. This print used the default settings in FlashPrint, with a .18mm layer peak and 50mm/s, taking 46 minutes.
Subsequent I wished to print one thing spectacular, so I introduced out Kijai’s Moon Metropolis 2.0, an improved and extra detailed model of a basic print. The outcomes have been gorgeous with crisp particulars, pointy turrets, no stringing and easy internal planet wall. This was printed in FlashForge’s Burnt Titanium PLA (opens in new tab), and with a .2mm layer peak, took 16 hours and 9 minutes to print.
Earlier than testing PETG, I made a decision to put in the textured PEI flex plate. Then required sticking a magnet to the aluminum warmth mattress and discarding the glass plate. The PEI plate works higher for PETG and doesn’t want a barrier of glue stick to stop it from adhering completely to the glass.
PETG ran completely on the Artemis, as seen on this stacked Fred the Frog. Printed in Inland Translucent Inexperienced PETG (opens in new tab) in 3 hours and 54 minutes with a .2mm layer peak with a regular 50mm/s pace.
TPU was a bust as I used to be unable to get it loaded. The feed system was unable to seize onto the filament, and for the reason that entry level is deep contained in the shrouded software I couldn’t push it in both.
The FlashForge Artemis is an efficient machine providing a plug and play expertise aimed toward learners and makers who don’t need to tinker with their printer, notably as a part of arrange. It dealt with extraordinary filament exceptionally properly, however the “simple load” software head couldn’t seize maintain of TPU.
The machine comes with a really beneficiant starter pack, together with two rolls of PLA filament and a construct plate improve. The built-in WiFi is a deal with, particularly with the price of including a Raspberry Pi to printers for the time being.
At $499, the FlashForge Artemis is pricey, however a strong selection if you’d like a pure plug and play expertise to begin your journey into 3D printing. Nonetheless, if you wish to save a little bit cash whereas gaining extra construct house and auto mattress leveling, we propose the Elegoo Neptune 3 Professional, at the moment on sale for $230. One other nice starter printer you’ll be able to stash within the closet is the extremely transportable Creality Ender 2 Professional, retailing at $169.
MORE: Finest 3D Printers
MORE: Finest Resin 3D Printers